All in one isolated three-phase, single-phase and DC power
Instrument quality power for remote applications
Solar Motor Systems line of Smart Independent Power Systems (SIPS) provide instrument quality stand-alone power to remote locations. It provides a three-phase motor control output, single-phase pure sine wave output and two isolated DC power(5v and 12v) for sensitive sensors and devices.
The three-phase motor power accommodates features like; three-phase harmonics control, core loss, frequency compensation, slip and torque management. The inverter produces clean, digital AC power with Power Factor correction.
This is a single, integrated unit which also includes built-in charger controller with MPPT management, programmable charge and discharge curves to optimize life of maintenance free batteries.
The system utilizes DSP technology which practically eliminates electrical and electromagnetic noise – and is IoT enabled for remote monitoring and control.
If the solar input falls below the minimum required to drive the motor, the system can be set to automatically switch to batteries to keep the motor running. When excess power is available, it is diverted to charge lead-acid batteries. Battery systems can be configured for 2, 4, 6, 8+ hours of backup operation, simply by adding more panels in series/parallel combination to match the size of the battery system.
Three-Phase
Isolated outputs
Use any standard 3-Phase AC motor in Delta mode only (208/240-400/415)
Smart power specially designed for three-phase AC motors
Built-in VFD control
Closed loop speed control
Direction control (where applicable)
Soft start technology
External trigger to start and stop (float switch or other sensors)
Power Factor correction
Overload/over voltage protection
Temperature management of controller and 3-phase devices
Light weight transformer-less design with low parasitic power loss
Enclosure/Misc.
Fanless design
NEMA rated case
All modules EMF protected
Warranty/extended warranty available
Single-Phase
Isolated outputs
110v/60hz or 230v/50hz
Power Factor correction
Overload/over voltage protection
DC Power
Isolated outputs
5V /10A and 12V/5A regulated
Switch Mode Power Supply (SMPS)
Ultra low electrical noise
Solar Panels
Smart Solar Panels w built-in celllevel MPPT management
Also works with standard PV panels
Batteries & Charge Controller
Maintenance free batteries
Programmable charge and discharge curves to optimize battery life
Multi-mode MPPT calculations
Simultaneous charge and discharge
Configurable duration (watt hours) of battery power usage
