Smart Power Stations

The SMS Smart Power Station is not like other inverters.

SMS Smart Power Stations are the most advanced on the market, with energy optimization technologies that exist nowhere else. SMS automatic source selection manages input energy dynamically, monitoring power demand and delivering continuous power from the most efficient mix of the available source. Demand-based auto starting of standby generator and spontaneous charging ensures uninterrupted power, day or night.

Green is great, but control is the key.

Maximize solar harvesting, prioritize the input sources and programmatically manage the load demand. Control which energy sources you use, and when you use them – and lower your electricity bill by reducing your peak power usage.

Uninterrupted, pure sine wave power irrespective of the source of energy – solar, batteries, grid or generator.
As a Passive User of grid power avoid the hassles and restrictions of Net Metering or other utility restrictions.
Utilize 100% of your solar investment – get ALL of the solar energy you collect. When solar supersedes demand, the system automatically charges the batteries.
Maximize battery charging and battery life with programmable dynamic charging.
Lower CapEx. You can install fewer solar panels, and gradually grow to full capacity.
Avoid the cost of UPS or stabilizers down line – with an SMS system you don't need them!
Set the preference, priority, time and duration of power sources to run the system.
Set the preference, priority, time and duration of power sources to charge batteries.

Green energy can save you money IF you are able to:

Accommodate the variable nature of solar power
Allow you to prioritize to use the lowest cost energy source
Optimize battery charging and battery life
Enable smart controls to dynamically monitor and control systems
Produce reliable high quality power when you need it

Now you can do all these with an SMS Smart Power Station. The always-on on-line inverter allows you to request time-of-use-billing, which can reduce your peak power (daytime) usage by intelligently using solar and batteries when peak rates are highest. Time-of-use-billing can significantly lower your overall utility bill.

Control the energy source and you control the energy cost.

Lowering your utility costs starts with controlling your electricity usage.

Control the power sources you use and when you use them and lower your electricity bill by reducing your peak power usage.
Gain consistent, uninterrupted, pure sine wave power irrespective of the source of energy – solar, batteries, grid or generator.
Avoid the hassles/restrictions of net metering and other utility restrictions – as a 'passive user' of grid power.
Gain the advantage of being able to use the solar power that you generate when the grid is not available. Grid-connect inverters can't do this!
Maximize the efficiency and life of batteries with programmable dynamic charging.
Utilize 100% of your solar investment – get ALL of the solar energy you collect. When solar supersedes demand, the system automatically charges the batteries.
Lower install costs. Install fewer solar panels and gradually grow to full capacity.
Avoid the cost of UPS or stabilizers down line – with an SMS system you don't need them!
Resolves the issue of islanding and net metering. Enables you to avoid peak power and induction load charges from the utility.

Our proprietary Differential Source Balancing technology dynamically monitors and automatically manages the available energy sources, adjusting to accommodate variations in the power (important when using a variable source like solar).

SMS Smart Power Stations deliver continuous power, of a consistent type and quality, from the most efficient mix of the available sources – an uninterrupted flow of high quality digital power, irrespective of the source.

The result: NO switching delays. NO electrical noise or harmonic distortion. Longer battery life. 100% utilization of the solar energy collected... and many other advantages that other inverter solutions can't match.

Smart Power Station – Capabilities Overview

Run system with as few as four 300w panels. Easily expandable up to 24 panels.
Highly efficient MPPT system auto-adjusts to variable solar input.
Low parasitic power consumption.
Active Power Factor Correction for charger (input & output).
Closed-Loop Power Management with built-in MPPT.
Smart Power Stations do not require a UPS (Uninterrupted Power Source) to accommodate delays and power spikes – because of instead of switching between sources like other inverters we balance between them!
Ability to auto start a standby generator.
Automatic (user selectable) Priority and Differential Source Balancing between solar/battery/grid sources.
Built-in Charge Controller with dynamic granular charging – simultaneously run device and charge batteries.
Digital Signal Processing produces clean AC power, practically eliminates electrical and electromagnetic noise.
Built-in Interrupted Hybrid Power Source (UHPS).
The Internet of Things (IoT) enabled – monitor and control systems from connected mobile device.
Programmable SMS (text) based monitoring and alerts.
Thermally-controlled fans able to send status text alerts. Hot-swappable.
UL Certified device (US).
TUV Certified (Europe, Asia).

Smart Power Station – System Input/Output

System accepts as few as four 300w panels. Easily expandable up to 24 panels.
Solar Input Voltage Range (Voc): 90-180V at 48V DC system / 135-270V DC at 96V system / 225-360V DC at 192V System
Nominal Input Voltage: 48V DC / 96V DC / 192V DC
Power Factor: 0.9 - 1.0 – with Active Power Factor Correction
Field selectable configurations: Split-phase to output 120 or 220/230/240Vac. 50Hz or 60Hz.
Surge Rating (20ms): 100% overload
Nominal Output Voltage (rms): 100-110-120VAC/220-230-240VAC *
Output Frequency: 50Hz/60Hz (+/- * 0.2% variation)
True Sine Wave, uninterrupted power with no harmonic distortions.
Surge rating: 20ms at 100% (15KVA)
Optional models: Single-phase in – 3-phase out. 3-phase in – 3-phase out

*Field selectable

Smart Power Station – Battery System

Built-in Charge Controller with dynamic granular charging (better than staged charging!)
Automatic Active Power Factor Correction of input & output.
Run devices from the batteries and charge batteries – simultaneously!
Dynamic balancing between batteries and other sources means the system is always connected – NO power delays!
Programmable dynamic charging curve for better battery life.
Programmable battery operation with automatic recovery programs/routine systems.
Battery Temperature Sensor with SMS (text) based monitoring and alerts.
Battery priority can be programmed and monitored online – No DIP switches!
When solar input supersedes demand, the system can automatically charge the batteries.
Charge conventional lead-acid or high-efficiency lithium-ion batteries. Other systems can't charge lithium-ion!
Charger and battery system options: 48V / 96V / 192V